
The Model C5A ChamferMate® pneumatic machine is a larger version of our C3A with the same features. It has a 5” inch OD capacity and is ideally used for deburring or chamfering solid parts, as well as beveling tubing up to 3/8” wall thickness. This C5A is not recommended for heavy wall tube, or pipe beveling applications. Please refer to the C5H ChamferMate for all pipe beveling needs.
Model C5A ChamferMate® Standard Features
- Heavy duty chamfer and tube beveling machine
- ½” to 5” OD Capacity
- Electronic variable speed drive
- Adjustable OD only head standard w/ machine
- Totally enclosed cutting area w/chip drawer
- Pneumatic clamping of part
- Fully adjustable air over oil feed spindle feed system
- 5 hp 3 phase motor standard
- Forklift slots for easy portability
- Tool rack included
- Compact Size for pipe beveling
Chamfering and Pipe Beveling Benefits
- No more hand-grinding or torching of weld bevels
- Automated pipe beveling machines are many times faster than portable units
- Cycle normally in the 5-20 second range
- Safer than hand grinding
- Accurately machines weld bevel and faces pipe square
- Sturdy construction and quality materials for years of dependable service
- Pipe beveling machines have low operating costs
- Can be operated by limited skilled employees
C5A Options Available
- Sliding stop for pipe beveling, chamfering tubing
- Three tool head for OD, ID, and facing tubing or pipe
- Hollow milling head
- Pencil pointing head
- Center drill head
- Casters
- Coolant
- Custom tooling
SPEC | C5A |
Diameter Range | 1/2" to 5" OD |
Pipe Sizes | 1/2" to 4" |
Center Height | 40.5" |
Typical Wall Thickness |
2" Pipe-SCH 160 |
Horsepower (Std) | 5 HP |
Voltage/Amp (1) | 220-3-60 / 30A |
440-3-60 / 15A | |
Standard RPM Range |
400-800 |
Pneumatic Requirement | 4 CFM @ 90 PSI |
Clamping | Pneumatic |
Spindle Feed | Air over Oil |
Feed Rate | Adjustable |
Spindle Stroke | 3" |
Coolant | Optional |
Pipe Stop (Sliding Stop) | Optional |
Type of Head (Std) | Single Tool OD Only |
Optional Head (2) | Three Tool ID, OD, Face |
Physical Size | 27"W x 35"D x 46"H |
Appx Weight Lbs | 1,250 lbs |
NOTES | |
(1) Other voltages and frequencies available for additional cost. | |
(2) Custom head and tool holders for special angles, J-Bevels, OD Hollow Milling, ID boring, Center Drilling, etc., are available. | |
NOTE: SPECIFICATIONS SUBJECT TO CHANGE. | |
All of MSI's chamfering machines and beveling machines can be customized to meet your individual production needs. |