 |
The ChamferMate® Model C3A is a compact chamfering / beveling machine that features a rigid one-piece ductile iron vise, top plate and spindle housing, linear ball rails, and a heavy-duty three-bearing spindle.
|
|
 |
The ChamferMate® Model C5A is a larger version of our C3A with the same features. It has a 5" inch OD capacity and is ideally used for chamfering or beveling pipe and tubing up to 3/8" wall thickness.
|
|
 |
The ChamferMate® Model C5H is a heavy duty hydraulic powered beveling machine with up to 5 inch OD capacity. It can also machine J bevels and other forms.
|
|
 |
The ChamferMate® Model C8H is a heavy duty hydraulic powered beveling machine with up to 8-3/4" OD capacity. With 20 HP, the C8H has the power to machine weld bevels and other forms on the end of heavy wall pipe and tubing within its range.
|
|
 |
The Model DEC-3 ChamferMate® Double End machine chamfers both ends simultaneously of bolt blanks, stud bolts, rod, bar, tubing or pipe.
|
|
 |
If one of our standard machines does not meet your requirements, MSI can design and manufacture a custom machine for you. Custom tooling, vises, strokes, and frames can be supplied.
|
|
 |
Model MM-24 MarkMate® marking machines are a simple easy to use machine for marking the ends of shafts, bolts, studs, and related items
|
|
 |
The Auto MarkMate® is an auto feeding version of our popular MM-24 machine. With speeds up to 40 parts per minute, production can be greatly increased on marking the ends of studs, rods and shafts.
|
|
 |
Designed to mark the outer diameter of cylindrical items such as pipe nipples the Rotary MarkMate® is capable of 40 parts per minuite capacity.
|
|
 |
Reliable NutMateTM assembly tables are used extensively in the fastener industry for assembling nuts onto studs, bolts, and similar items prior to shipment.
|
|
 |
The Horizontal NutMate easily assembles nuts and washers on anchor bolts and other long threaded parts.
|
|
 |
The MSI-100 fully automatic 100 ton bar shear will provide you with clean cuts and features such as crop cutting, sorting of drops, and accurate counting of parts.
|
|
 |
The MSI-70 is a Semi-Automatic 70 ton shear for cutting round bars up to 1-1/4" diameter. Dependable hydraulic power and pinch roller feed provides you with and easy to operate package.
|
|
 |
MSI Heavy Duty Parts Feeder for orientating and feeding cylindrical parts into Thread Rollers, Chamfer Machines, Cylindrical Grinders and similar machines.
|
|
 |
Efficiently cross drills bolts for safety wires. With available tooling, regular and heavy hex heads, socket heads, 12 point bolts, as well as round bar can be cross drilled.
|
|
 |
The Bolt Cutoff Jig is a simple and effective way to cutoff or shorten bolts. The jig mounts into any 10 inch or larger band-saw allowing the operator to cut off multiple bolts at a time.
|
|