|
View C8H ChamferMate Video |
|
ChamferMate Specifications PDF
|
| SPEC |
C8H |
| Diameter Range |
1" to 8-3/4" OD |
| Pipe Sizes |
1" to 8" |
| Appx Wall Thickness (1) |
3/4" |
| Horsepower (Std) |
20 HP |
| Voltage/Amp (2) |
440-3-60 / 27A |
| |
220-3-60 / 54 A |
| RPM Range (3) |
150-600 |
| Pneumatic Requirement |
1 CFM @ 90 PSI |
| Clamping |
Hydraulic |
| Spindle Feed |
Hydraulic |
| Feed Rate |
Adjustable |
| Spindle Stroke |
6" |
| Coolant |
Standard |
| Pipe Stop (Sliding Stop) |
Standard |
| Type of Head (Std) |
Three Tool ID, OD, Face |
| Optional Head (4) |
|
| Physical Size |
37"W x 51"D x 68"H |
| Appx Weight Lbs |
3,500 lbs |
| |
| NOTES |
| (1) Varies with type of material and angle or form being produced. |
| (2) Other voltages and frequencies available for additional cost |
| (3) Other RPM ranges available |
| (4) Custom heads and tool holders for special angles, J-Bevels, OD Hollow Milling, ID boring, Center Drilling, etc. are available. |
| (5) Only required if equiped with Pipe Stop |
| All of MSI's chamfering machines and beveling machines can be customized to meet your individual production needs. |
|
The ChamferMate® Model C8H is a heavy duty hydraulic powered chamfering machine with up to 8-3/4” OD capacity. With 20 HP, the C8H has the power to machine weld bevels and other forms on the end of heavy wall pipe and tubing within its range.
Standard Features
- adjustable from 1 1/2" up to 8" pipe
- accurately machines weld bevel and faces pipe square
- fast cycle times, normally under 20 seconds
- adjustable cutter head with interchangeable carbide inserts set with gauges
- interchangeable grips for different sizes of pipe, tubing and solid bar
- electronic variable speed drive
- heavy duty construction utilizing machine tool-type linear rails
- hydraulic powered clamping and feed
- coolant system
- large chip drawer
ChamferMate Factsheet (PDF)
Product Photos
