|

View C5H ChamferMate Video |
|
ChamferMate Specifications PDF
|
| SPEC |
C5H |
| Diameter Range |
1/2" to 5" OD |
| Pipe Sizes |
1/2" to 4" |
| Appx Wall Thickness (1) |
5/8" |
| Horsepower (Std) |
7-1/2 HP |
| Voltage/Amp (2) |
220-3-60 / 22A |
| |
440-3-60 / 11A |
| RPM Range (3) |
500-1000 |
| Pneumatic Requirement |
1 CFM @ 90 PSI (5) |
| Clamping |
Hydraulic |
| Spindle Feed |
Hydraulic |
| Feed Rate |
Adjustable |
| Spindle Stroke |
3" |
| Coolant |
Standard |
| Pipe Stop (Sliding Stop) |
Optional |
| Type of Head (Std) |
Single Tool OD Only |
| Optional Head (4) |
Three Tool ID, OD, Face |
| Physical Size |
30"W x 36"D x 52"H |
| Appx Weight Lbs |
1,600 lbs |
| |
| NOTES |
| (1) Varies with type of material and angle or form being produced. |
| (2) Other voltages and frequencies available for additional cost |
| (3) Other RPM ranges available |
| (4) Custom heads and tool holders for special angles, J-Bevels, OD Hollow Milling, ID boring, Center Drilling, etc. are available. |
| (5) Only required if equiped with Pipe Stop |
| All of MSI's chamfering machines and beveling machines can be customized to meet your individual production needs. |
|
The ChamferMate® Model C5H is a heavy duty hydraulic beveling machine with up to 5" inch OD capacity. With more power than our pneumatic machines it can machine j-bevels and other forms on the ends of heavy wall pipe and tubing as well as chamfer larger sizes of solid bar or studs. The C5H can also be used as a heavy duty deburring machine.
Standard Features
- adjustable from 1/2" up to 4-1/2" pipe
- accurately machines weld bevel and faces pipe square
- fast cycle times, normally under 20 seconds
- adjustable cutter head with interchangeable carbide inserts set with gauges
- interchangeable grips for different size pipe, tubing, and solid bar
- electronic variable speed drive
- heavy duty construction utilizing machine tool-type linear rails
- hydraulic powered clamping and feed
- coolant system
- large chip drawer
ChamferMate Factsheet (PDF)
Product Photos
