ChamferMate® high production chamfering machines and beveling machines are designed for easy setup and operation. Heavy duty construction and quality components are utilized to provide our customers with years of dependable service. Models available for a wide range of diameters and applications such as chamfering, beveling, and deburring.
Benefits of our chamfering machines and beveling machines include:
- No more hand-grinding or torching of weld bevels
- Many times faster than portable units
- Cycle normally in the 5-20 second range
- Safer than handgrinding
- Accurately machines weld bevel and faces pipe square
- Sturdy construction and quality materials for years of dependable service
- Low operating cost
Features of our chamfering machines and beveling machines include:
- Machines available for ½" up to 8" pipe or tubing
- Adjustable cutter head quickly set with gauges
- Uses standard off-the-shelf carbide inserts. Tooling available for custom
angles and J-bevels
- Interchangeable grips for different size pipe or tubing
- Electronic variable-speed drive
- Heavy-duty spindle that rides on machine tool-type linear ball rails
- Totally enclosed cutting area
- Large chip drawer
ChamferMate Factsheet (PDF)
 |
The ChamferMate® Model C3A is a compact chamfering / beveling / deburring machine that features a rigid one-piece ductile iron vise, top plate and spindle housing, linear ball rails, a heavy-duty three-bearing spindle and...
|
 |
The ChamferMate® Model C5A is a larger version of our C3A with the same features. It has a 5" inch OD capacity and is ideally used for chamfering, deburring or beveling pipe and tubing up to 3/8" wall thickness.
|
 |
The ChamferMate® Model C5H is a heavy duty hydraulic powered beveling machine with up to 5 inch OD capacity.
|
 |
The ChamferMate C8H is a heavy duty hydraulic powered beveling machine with up to 8-3/4" OD capacity.
|
 |
The Model DEC-3 ChamferMate® Double End machine chamfers both ends simultaneously of bolt blanks, stud bolts, rod, bar, tubing or pipe. With speeds up to 30 parts per minute, the DEC-3 will increase the production of these parts many times over our...
|
 |
If one of our standard machines does not meet your requirements, MSI can design and manufacture a custom machine for you. Custom tooling, vises, strokes, and frames can be supplied.
|